Huawei Announces The Mate Xs - Revised 2nd Gen Foldable

[harlan4096]

Today Huawei is announcing the successor of one of 2019’s most talked about devices: the new Mate Xs. The successor to the Mate X refines the design of the predecessor, introducing a new more durable hinge as well as a new display protection material, as well as updating the internals of the phone to include the newer generation Kirin 990 5G SoC.

The Mate X last year made a big splash with its unique new foldable design, and was able to steal a lot of the thunder from the competition such as Samsung’s Galaxy Fold. Although the original Mate X was extremely interesting, it’s wasn’t quite the most perfected design as the outwards folding screen was a critical weak point of the phone.

The new Mate Xs introduces a new hinge design that greatly improves the robustness of the flexible display, allowing for a much “flatter” and crease-less device experience, all whilst improving the screen’s durability thanks to a new polymide top protection layer.

Internally, the new Mate Xs sees a large upgrade in specifications thanks to the new Kirin 990 5G chipset. It’s to be noted that not only does this bring more CPU and GPU power compared to its predecessor Kirin 980 chipset, but this means that the new Mate Xs ditches the discrete 5G modem chip in favour of the integrated unit found in the new 5G SoC, a feature that only Huawei is able to claim possible in 2020 flagship models.

We don’t yet have confirmation on other configuration options such as RAM and storage, but likely they’ll be extremely high, much like the Mate X’s 8GB/512GB configurations last year.

As for other specifications, the Mate Xs more or less is a continuation of what we’ve seen in the Mate X. The battery capacity remains at a similar 4500mAh figure, split between two battery cells on both halves of the phone.

The camera configuration also remains the same, and we see a 40MP RYYB f/1.8 sensor as the main unit, accompanied by a 8MP 3x telephoto module with f/2.4 optics and OIS, as well as a 16MP ultra-wide-angle f/2.2 camera module.

A New Hinge - More Robust This Year

Along with the chipset upgrade, the main feature of the new Mate Xs is the new hinge design.

One of the larger issues with the Mate X last year is that it showcased quite a prominent crease in the fold of the display, and this was quite noticeable in the display when the device was completely unfolded.

Externally, this is visible through a new cover piece at the sides of the hinge which now better cover the internals (In comparison with the original Mate X’s design), and should help with avoiding getting particulates inside of the hinge mechanism.

What this does is that when unfolded, the display remains significantly smoother and flatter compared to the original Mate X which had the tendency for the screen to slightly curl upwards at the fold.

The Mate Xs has the same screen specifications as its predecessor, an AMOLED panel at a full 2480 x 2200 resolution when unfolded results in an 8” diagonal 8:7 aspect ratio viewing experience. When folded, on the short screen side it results in an effective 6.38” screen with 892 pixel width, and on the wide side it results in a 6.6” screen with 1148 pixel width.

The new Xs introduces a new polymide screen material, which Huawei describes as being harder at the surface yet softer in terms of its flexibility. Whilst I never had the opportunity to hold the original Mate X, my experience with the Mate Xs seemed to be a lot better than what other people had experienced on the original, with the display being significantly flatter and harder throughout the screen surface, not only at the fold.
...

Continue Reading