The Western Digital WD Blue SN500 SSD Review: Moving The Mainstream To NVMe

[harlan4096]

Western Digital's mainstream consumer drives have long been branded as WD Blue drives, and this carried over to SSDs after their acquisition of SanDisk. The first two generations of WD Blue SSDs were SATA drives using TLC NAND and were worthy competitors for the Crucial MX series and Samsung 850 EVO. The WD Blue SN500 is the third generation WD Blue SSD, and it moves the WD Blue brand over to a very different market segment: the SN500 is an entry-level M.2 NVMe drive.

Western Digital has been selling consumer NVMe drives for a few years using their high-end WD Black branding, but NVMe isn't just for enthusiast products any more. For the past year we've been seeing most SSD brands offering a lower tier of NVMe products that sit between their SATA and high-end NVMe offerings, both in terms of price and performance. This entry-level NVMe niche has at times been squeezed down to almost nothing when there are particularly well-priced high-end drives, but the general idea of splitting the consumer NVMe SSD market into two tiers isn't going away. SATA is starting to be phased out of use for primary storage in client PCs. Western Digital started supporting that trend over a year ago with the PC SN520 SSD for OEMs, which the WD Blue SN500 is derived from.

Despite bearing the WD Blue name, the SN500 is functionally not a direct replacement for the SATA WD Blue SSDs. The SATA predecessors offered capacities up to 2TB, while the SN500's only capacity options are currently 250GB and 500GB. Those are the most common and important capacity points for consumer SSDs, but the absence of 1TB and 2TB options are a glaring omission, especially now that 1TB drives are approaching $100. The lack of high-capacity versions of the SN500 make sense when considering the OEM SN520 it is based on: that drive was intended to compete against the smallest form factor SSDs used tablets and the thinnest notebooks. The OEM SN520 is available in form factors as small as M.2 2230, and even though the retail SN500 uses the more typical 80mm length that offers the broadest compatibility with consumer systems, it retains the same layout that puts all the electronics in the first 30mm of the card. The SN500 uses a design that was never intended to accommodate more than 512GB of flash. The extra length on the card is occupied only by the drive's label.

Like many entry-level NVMe SSDs the SN500 uses only two PCIe lanes for its host interface, which ensures it cannot match the peak performance of high-end drives with PCIe x4 connections. The lower lane count helps keep the pin count and power consumption of the controller down, which are important factors for a M.2 2230 drive but matter considerably less for a retail drive like the SN500.

Continue Reading